ResMed AirSense 10 AutoSet with HumidAir - C2C Version
The ResMed AirSense 10 AutoSet with HumidAir is a whisper-quiet, auto-adjusting device intended for use to treat obstructive sleep apnea. The AirSense 10 AutoSet is an auto CPAP machine. AutoPAP machines “automate” the pressure setting to match your needs at any moment. These machines move the level of pressure up and down as needed by looking for obstructions or pauses in breathing. The AirSense 10 AutoSet monitors breathing patterns and automatically adjusts the airway pressure to ensure ideal sleep apnea therapy at the most comfortable pressure possible.
The AirSense 10 AutoSet is equipped with a state-of-the-art feature set intended to help you fall asleep and stay asleep so that you get a great night’s rest. Integrated humidifier partners with an onboard ClimateControl system to reduce common complications of sleep therapy such as a dry mouth and nose.
Data sharing is also a walk in the park! With the AS10 C2C device, simply have the data read using the included SD card to seamlessly record your sleep data and compliance reports, and then you can share that data with your healthcare professionals!
- Enhanced AutoSet algorithm adjusts for optimal CPAP pressure
- Card-To-Cloud - The AS10 Card-To-Cloud device stores your sleep and therapy data on the included SD card, which can then be uploaded to the cloud to share with your healthcare provider.
- AutoRamp and SmartStart & SmartStop monitoring
- Expiratory pressure relief with EasyBreathe
- Integrated HumidAir humidification with ClimateControl feedback
- Data management via cellular chip connection
AutoCPAP therapy tailored to your every breath
The AirSense 10 AutoSet uses ResMed’s enhanced airway monitoring algorithm that gets input from every breath you take. The AirSense 10 detects and adjusts for flow limitations, snoring, and apnea events. The AirSense 10 AutoSet migrates the delivered pressure at the airway up and down to ensure you get the sleep settings you need throughout the night. When breathing is less obstructed, it ramps down the pressure. When breathing is more obstructed, it ramps up the pressure.
Sleep onset detection sends a signal to the AirSense 10 AutoSet, telling it when to kick into action. The airway monitoring algorithm also titrates settings gently so that your sleep is not impacted as pressures rise or fall.
User-friendly sleep therapy from start to stop each night
From the time you put on your mask until you take it off, the ResMed AirSense 10 AutoSet is working to meet the needs of every breath. An AutoRamp feature at startup gradually increases the delivered airway pressure. The AutoRamp can be configured with a timer or with SmartStart and SmartStop monitoring. When SmartStart and SmartStop are toggled on, the AirSense10 starts the ramp when it detects a breath and turns off pressure delivery when it detects mask removal at the end of therapy.
ResMed’s EasyBreathe feature provides expiratory pressure relief. During inspiration, the delivered pressure stays steady to overcome airway obstruction. When EasyBreathe is turned on, the pressure drops slightly during exhalation to make breathing out feel more natural. Expiratory pressure relief is particularly helpful for sleep apnea patients who need higher airway pressures.
An onboard MaskFit test allows you to confirm your mask is fitting well before drifting off to sleep. If a leak is detected you can adjust and quickly retest.
The HumidAir humidification system is built into the AirSense 10. Using a humidifier to reduce dryness of the mouth or nose has never been simpler. The humidifier slides out for filling with distilled water, then slides into the machine’s casing, safely out of the way. The HumidAir humidifier can be used with or without a heated circuit. Eight levels of humidification are selectable without a heated circuit. When coupled with the ResMed’s ClimateLine Air Heated Tubing, the HumidAir humidifier accesses the AirSense 10’s automated ClimateControl system. The ClimateControl system automatically adjusts temperature and humidification levels, so the user does not have to navigate menus or make setting changes regardless of the room’s temperature. The ClimateLine Air Heated tube also has a 360-degree swivel at the machine to support user movement.
The AirSense 10’s intuitive interface and user-friendly controls pair with a color LCD screen. The screen uses an ambient light sensor to adjust screen brightness up and down as needed. The sensor dims the screen during nighttime hours so that neither you nor your partner is bothered by the glow during sleep.
An embedded cellular chip delivers information to you and your clinicians about each therapy session. The MyAir smartphone application for both Apple and Android phones provides you with access to summaries about your sleep therapy as well as educational resources.
The AirSense 10’s software captures a wide range of inspiratory flow limitations. Advanced detection for non-obstructive sleep events, such as central apnea, Cheyne Stokes breathing, and respiratory effort arousal events gives your care team ongoing insight into your sleep therapy needs and reduces the need for sleep lab visits.
The RemoteAccess software also functions over the cellular connection. Your care team can view your data, update your machine, adjust settings or troubleshoot problems without a need for you to configure a link to your Wi-Fi or home network. Data can also be stored and shared using an SD memory card(not included).
Set-Up & Maintenance
- Place the ResMed AirSense 10 AutoSet on a sturdy surface within easy reach of the power outlet.
- Place the device below head height to prevent it from falling over onto the user.
- Routine maintenance and cleaning are essential contributors to successful sleep therapy and satisfaction.
- Use distilled water in the humidifier to reduce bacterial growth and prevent mineral deposit build-up.
- The air filter should be changed at least every six months.
- Check the filter regularly for holes or blockages and change it sooner than every six months if needed.
- Daily: Humidifier
- Weekly: Device and tubing
Note: NEVER submerged the machine in water
- Wipe the exterior with a dry cloth.
Part Cleaning (including humidifier)
- Hand wash in warm water with mild dish soap.
- Rinse thoroughly with clean water.
- Air dry only away from direct sunlight.
- Hang the tubing with both ends pointing toward the ground while drying.
Do not clean with products containing alcohol, scents, antibacterial agents, antiseptics, bleach, chlorine, or moisturizers.
What is Card-to-Cloud (C2C)?
C2C, or Card-to-Cloud, refers to the ability of healthcare providers to access patient therapy and usage data via the device’s SD card. While all ResMed devices capture and safely store patient nightly usage data, Air10™ C2C devices cannot relay data directly to the cloud. However, there are steps that can be taken so the data is available for the patient and clinician. Clinicians can use AirView™ to log patient data using the Air10 C2C devices by manually downloading the data off of the patient’s SD card, located on the side of the Air10 C2C device.
Will C2C devices come with an SD card?
Yes. All C2C devices come with a compatible SD card installed in the device.
Why is ResMed offering C2C devices?
To serve the constantly growing backlog of patients waiting to start therapy or to replace a device that is at the end of its design life, they're temporarily adding C2C PAP device to their fleet of connected sleep and respiratory care devices.
Adding C2C devices to ResMed's portfolio of offerings is a temporary decision specifically aimed at alleviating the unmet needs of hundreds of thousands of patients worldwide waiting for ResMed PAP therapy while CAM (Communications Access Module) supply remains constrained.
How can I identify that the device is a C2C device?
Air10 C2C devices are identifiable by the following:
- Air10 C2C devices have unique model numbers
- Air10 C2C devices will have unique labeling
- When powered on, Air10 C2C devices will not have any cellular bars on the top-right corner of the home screen
Will I be able to use myAir app with AirSense 10 C2C devices?
No. Patients will not have visibility to their therapy and usage data within the myAir app. The myAir app will not capture the patient's sleep data from the Air10 C2C device.
How do patients see how they are performing on therapy with an Air10 C2C device?
Patients will be able to see their nightly data on the device's home screen each morning and view their therapy reports by accessing the Sleep Report menu on the home screen.
For patients to have access to comprehensive therapy details within the Sleep Report menu, ensure that Essentials Plus is selected on the device. Essentials Plus can be enabled within the Clinical Menu by selecting Settings, followed by Essentials, and finally by selecting Plus.
By enabling Essentials Plus, you can allow highly-engaged patients to access additional features, including changing mask type, EPR (if available), SmartStart, and Run Warmup (if water tub is available).
Which accessories can I use with the Air10 C2C devices?
AirSense 10 C2C devices are compatible with all existing AirSense 10 accessories and components. Air10 device accessories and components will have no change to current model numbers.
How will clinicians see how patients are performing on therapy with an AirSense 10 C2C device?
Clinicians will be able to use AirView to log data from patients using Air10 C2C devices by manually downloading the data off of the device’s SD card.
What is the difference between the three types of tubing (ClimateLineAir, SlimLine and standard CPAP tubing) that are available for use with the AirSense 10?
The ClimateLineAir tubing is a heated wire tube that receives feedback from the AirSense 10’s climate control system to optimally regulate temperature and humidity. Both the SlimLine tubing and standard CPAP tubing are non heated. However, ResMed’s SlimLine tubing is 40% lighter and 20% thinner than the standard CPAP tube.
Can I take the AirSense 10 on a plane?
Yes, the AirSense 10 AutoSet is FAA approved. The machine will not count towards your carry-on luggage limit because it is a medical device. Airlines have different regulations regarding in-flight CPAP use so please make sure you are familiar with your airline’s on-board CPAP use policy.
Does the AirSense 10 ClimateLineAir heated tubing work with any ResMed machine?
No, the AirSense 10 ClimateLineAir heated tubing only works with ResMed AirSense 10/AirCurve 10 models. It is not compatible with the newest ResMed AirSense 11 or the older S9 models.
The AirSense 10 AutoSet is a lightweight auto CPAP machine stuffed with options to make sleep therapy adherence simple. It is a state-of-the-art device with state-of-the-art monitoring. The standard cellular connectivity sets it apart from other devices. The AirSense 10 AutoSet comes with everything you need to get started with responsive, humidified auto CPAP therapy. The only upgrade you need to ponder is whether to pick up the heated wire tubing … and my vote is to grab it! If you are new to AutoCPAP or ready to upgrade your current equipment, order one from CPAPman and find out why the AIrSense10 AutoSet with HumidAir is an industry leader in sleep therapy today.
- AirSense 10 AutoSet CPAP Machine C2C version
- Water Chamber for the Integrated Humidifier
- Either SlimLine Standard Tubing or ClimateLineAir Heated Tubing
- 90w Power Supply with AC Cable
- User Manual (C2C addendum included)
- Travel Case
- SD Card (inserted)
- Disposable Filter (inserted)
My Phillips System One machine is subject to the recall so I am looking for a replacement until it is repaired/replaced.
Is this script acceptable for this machine since it is an "auto" pressure machine?
Is this script acceptable based on it's age?