Air Outlet Adapter for AirSense 10 and AirCurve 10
Quality Replacement Air Outlet AdapterThe Air Outlet Adapter for the AirSense 10 and AirCurve 10 by ResMed is a top-notch replacement item that is easy to install and just as easy to remove. This simple, straightforward part is an essential piece of your machine system and must be attached in order for your device to operate correctly. The air outlet adapter should only be removed when it needs to be cleaned or replaced. Removing the air outlet adapter is a cinch - simply use the release clip which is located inside your machine and then pull the adapter out from the rear. This adapter possesses a pleasing gray exterior and is made of high-quality material.
Compatibility DataThis replacement air outlet adapter is designed to work with all of the machines from the AirSense 10 and AirCurve 10 lines. Specifically, this replacement part will work with the following devices: the AirSense 10 CPAP machine, the AirSense 10 Elite, the AirSense 10 AutoSet, the AirSense 10 AutoSet for Her, the AirCurve 10 S, the AirCurve 10 VAuto, the AirCurve 10 S/T, and the AirCurve 10 ASV.
Features
- Compatible with all AirSense 10 CPAP machines and all AirCurve 10 Bi-Level machines by ResMed
- Must be installed in order for your machine to function
- Can be removed easily with an internal release clip
- High-quality replacement item
- Simple to install and remove
- Gray exterior
Setting Up the AirSense 10 CPAP Machine by ResMed
I was in need of an elbow to allow connection of air tubing to my new ResMed AirSense 10 AutoSet with HumidAir to be to either side of the the machine. The image looked somewhat strange, but it was listed as an "AIR OUTLET ADAPTER FOR AIRSENSE/AIRCURVE/AIRSTART CPAPS", so I ordered it.
Once I received it, I could see there was no way this was going to accomplish what I was trying to do. Some time later, after talking to the folks at CPAPman.com, I learned that this was a replacement part that directs the flow of air from the humidifier to the outside of the machine, which you connect your hose to.
What I really needed, and eventually found, was ResMed part number 37394 which is identified as "ResMed Tubing Elbow (for Plastic Tubing)". This component is also sold by CPAPman.com [https://www.cpapman.com/cpap-machines/accessories/resmed-tubing-elbow-for-plastic-tubing-p-1707.html]
It is unclear how I managed not to find it in my search. My bad!