CPAP Mask, Small Household Items
Disinfecting your CPAP mask, water chamber or any small household item has never been easier. With the Lumin UV Light Sanitising machine by 3B Medical. Not only are you able to maintain good health but your products will continue to last longer. 3B has given all users a more safe and effective option to have your equipment cleaned without exposure to harsher chemicals. All it takes is five(5) minutes of time and say goodbye to all the harmful bacteria. This is all made possible due a powerful UV light beaming through the fail-safe chamber and effectively neutralising up to 99% of what you don't normally see.
Most Thorough CPAP Cleaner Available
Perhaps, considered to be one of the best, if not the best feature for the Lumin is how quickly turnaround time is. This system operates and cleans your equipment in a five minute cycle. Once the items inside are disinfected, the items are safe to use immediately after the time has run out. So little needs to be done, simply pull the tray out from the Lumin, place the items you want disinfected, close it, and press the button to power it on. Once it's done, you will hear a beep and off you go to sleep.
Clean More than just CPAP Items
What stands out about the Lumin is that unlike other sanitising equipment on the market that only cleans CPAP equipment, the Lumin is quite the opposite. Things ranging from toothbrushes, glasses, sleep mask, and the list goes on.
*Disclaimer* Any non-living item can be sanitised inside the tray so if the item in question is doesn't apply to this statement then clean away!
- Weight: 5.5 lbs
- Dimensions: 12.25" L x 8.5" W x 7.75" H Tray Dimensions: 9 1/2" L X 6 1/2" W x 4"H
- Voltage: 110 VAC (60 Hz) - 220 VAC (50 Hz)
- Environmental Conditions: Storage Temperature: 0° - 120° F (-18° - 49° C)
- Operating Temperature: 20° - 100° F (7° - 38° C) Humiditiy: Up to 93%, non-condensing Warranty: 2 Years
- Compatible with any CPAP Mask - Adapters needed for heated tubing for certain manufacturers
- Thorough clean - Cleans 99.9 percent of bacteria and germs
- Chemical free -
You do not need to dissemble your mask and tube when using the CPAP Cleaner, just put your mask and let the machine do the work for you. Make sure you clean your equipment daily.
Introducing the Lumin
Do I need to take apart my mask to put it in the Lumin?
No, your mask will come out thoroughly clean, as 99.9 percent of bacteria will be destroyed while inside the tray. However, if you are a nasal pillow mask user, you will still have to clean it manually, as the Lumin only cleans the surface and not the internal parts where water and mold can grow.
Can I use the Lumin to clean my CPAP tube?
As the Lumin uses UV light to kill fungi and bacteria, it is only meant for surface areas. To combat bacteria in tubing, the Lumin Bullet can be used.
- Lumin Sanitizer
- Lumin Light Bulb
- Lumin Rack
- Quick Start Instructions