Customer Support
Mon - Fri: 5am - 5pm PT
Sat: 8am - 12am PT
Home > CPAP Machines > BiPAP ST/Adapt > AirCurve 10 VPAP ST with HumidAir/Heated Tube - ResMed

AirCurve 10 VPAP ST with HumidAir/Heated Tube - ResMed

37306, 37307

Free Shipping

Rx required.

You may also like

AirCurve 10 S/T VPAP Machine with HumidAir

Stellar VPAP Machine

The AirCurve 10 S/T VPAP Machine with the HumidAir System by ResMed is an advanced VPAP device which possesses a total of five operational modes and a plethora of advanced functions and eye-catching features. This machine is stocked with special iVAPS technology, expiratory pressure relief (EPR), automatic start and stop functions, Vsync automatic leak management, ramp function, mask fitting function and other great performance features as well. With this AirCurve 10 it will permit sleep apnea patients to receive adequate therapy without having to bear with significant levels of discomfort.

S/T and Other Operational Modes

The AirCurve 10 S/T has a total of five operational modes - spontaneous (S), spontaneous/timed (S/T), timed (T), VAuto and conventional CPAP mode. The primary mode of this particular VPAP device - spontaneous/timed (S/T) - will initiate a breath and begin IPAP. The duration of IPAP is controlled by your machine; this VPAP device will then automatically reduce pressure to EPAP. The S/T mode provides consistent relief and minimizes discomfort during therapy.

iVAPS Technology

The AirCurve 10 S/T features iVAPS technology which is a solution for unobtrusive ventilation. iVAPS targets alveolar ventilation for stable gas exchange in respiratory episodes. When necessary, iVAPS initiates a type of secondary pressure which takes advantage of Vsync leak compensation to better create patient-ventilation synchrony.

Expiratory Pressure Relief

Adapting to the pressure levels generated by sleep apnea machines is one of the most difficult challenges for new patients. The expiratory pressure relief (EPR) function for the AirCurve 10 S/T makes adjusting to such pressure levels much easier by providing consistent and substantial relief throughout your whole therapy session. When you inhale, the EPR function will artificially lower the pressure in order to deliver relief, and then elevate the pressure back to normal levels upon exhalation.

Smart Start/Stop

This device has SmartStart/SmartStop functions which simplify the processes of turning on and turning off your machine. When you take your first breath into your mask, SmartStart will automatically turn your machine on; then when you remove your mask SmartStop will automatically shut your device off. This technology not only makes it easier to operate your machine it also helps conserve machine power.

Vsync and TiControl

Vsync automatic leak management is an algorithm which monitors your breathing cycle and attempts to make proper adjustments when patients experience unintentional mask leakage. Mask leakage decreases your seal quality and can seriously compromise your results; Vsync is designed to make corrections automatically so you receive your desired pressure levels consistently throughout sleep. The Vsync algorithm works together with TiControl. TiControl enables patients to set minimum and maximum time limits so they can better address issues with their breathing cycle. Using TiControl will allow you to maximize the effectiveness of the Vsync system.

Advanced Humidification System

The humidification system for the AirCurve 10 S/T - the HumidAir - is a technologically sophisticated device which represents a significant improvement when compared with earlier humidifiers. The HumidAir system will maintain your desired temperature and humidity levels and help prevent some of the unpleasant potential side effects of therapy such as nasal congestion, irritation, sore throat and so forth.

ClimateLineAir Tubing(Optional)


The AirCurve10 is compatible with standard tubing, SlimLine tubing and the newly created ClimateLineAIR heated tubing. The ClimateLineAIR heated tubing was designed specifically to work for the AirCurve/Sense 10 and will contribute substantially to your humidification. You will avoid the troubles of rain-out, overheating and other pitfalls. One thing to keep in mind is the AirSense/Curve 10 ClimateLineAir tubing and general Climate-line tubing are not compatible

Ramp Function

In order to help patients fall asleep more naturally, the AirCurve 10 S/T is equipped with an advanced ramp function. The ramp function allows users to artificially suspend the influx of pressure for a specified period of time (between 5 and 45 minutes) so they will not take notice

Mask Fitting Feature

The AirCurve 10 S/T offers a special function which will visually indicate whether your mask has been fitted correctly and is therefore providing an effective seal. When your mask is installed, the AirCurve 10 S/T will display either a smiling face or a frown face - intuitively, a smiling face means that your seal is effective while a frown indicates that your seal is defective and your mask fit needs to be corrected.

Straightforward Operation

The AirCurve 10 S/T is remarkably easy to use. This VPAP machine has large buttons, a brightly lit screen and a convenient scrolling system which allows patients to make adjustments with ease. Impressively, the screen for the AirCurve 10 S/T is able to automatically adjust its brightness depending on surrounding light; this function ensures that patients will always be able to cleanly see their screen regardless of the time of day.

Pressure Range

The AirCurve 10 S/T VPAP machine has an operating pressure range of 3-25cm H2O. This pressure range is wider than normal and allows patients to have access to higher levels of pressure than they could potentially receive with conventional CPAP machines.

Advanced Data Management

Maintaining an aware of the status, direction and progress of your therapy is essential to optimizing your experience and receiving the best possible results. The AirCurve 10 S/T makes this a simple task with its superior data management system. This VPAP machine includes a data card and has an integrated wireless module; the wireless module enables patients to transfer their therapy information via the internet directly to their physician or healthcare provider. This VPAP device has the capacity to store up to 365 days of summary and compliance data, 30 sessions of detailed data and 7 sessions of high resolution flow data.


  • HumidAir with Climate Control and ClimateLine (optional ClimateLineAir tubing)
  • Five operational modes - CPAP, VPAP, spontaneous, spontaneous/timed and timed
  • Comes with travel bag and 3 meter tubing
  • Advanced data management capabilities
  • Operating pressure range 3-25cm H2O
  • Adjustable trigger and cycle sensitivity
  • TiControl (time minimum/maximum)
  • Vsync leak compensation algorithm
  • Expiratory pressure relief (EPR)
  • Integrated wireless module
  • SmartStart/SmartStop
  • Includes SD data card
  • Mask fitting feature
  • Leak alert system
  • iVAPS technology
  • Easy to operate
  • Ramp function



Modes of Operation:


Pressure Range:

3-25 cm H2O

Ramp Up Time :

0-30 minutes (5-minute increments), Auto Ramp


4.6 x 10 x 5.9 in.


2.8 lbs

Smart Start:


Sound Level:

27 dBA


Disposable Polyester fiber

Wireless Module:


Data SD Card

Up to 365 days

Altitude Compensation:

Automatic up to 8500 ft

Electrical Requirements:

100 - 240, 50/60 Hz

DC Output:

24V, 3.75A

Power Supply:

90 watts


Integrated Heated Humidifier


2-Year Manufacturers Warranty

Operating Humidity:

10 - 95% relative humidity, non-condensing

Getting Acquainted Sleep Apnea Treatment




37306, 37307
E0471 + E0562 + A9279 + A4604
Machine Weight
2.45 lb
Machine Weight with Humidifier
2.75 lb
Machine Size Only
8" x 4.6" x 5.91" (LxWxH)
Machine Size with Humidifier
10" x 4.6" x 5.91" (LxWxH)
Humidification System
Built-in heated humidifier
Integrated Heated Hose
Humidifier Settings
Water Chamber Capacity
380 ml
Pressure Range
4-20 cm H2O (CPAP); 3-25 cm H2O (S, ST, T)
Pressure Relief
EPR 1 to 3 (CPAP only)
Set Time 0-45 mins
Starting Ramp Pressure
4 cm H2O default (CPAP only)
AC Input
100-240V, 50-60Hz
AC Power Supply
Power Cord Length
6 ft
DC Converter
Battery Option
Supports Remote Monitoring
Yes, built-in cellular modem (C2C model excluded)
Data Download
Yes via SD card
SD Card Included
Yes, 2GB
AHI Display
Machine, app (requires modem)
FAA Approved
Altitude Adjustment
Automatic up to 8500 ft
Oxygen Use
Yes up to 15L/min (CPAP, S, ST, T)
Oximetry Compatibility
Yes, ResMed AirSense/AirCurve 10 Oximetry Kit (370004)
Compatible with All Masks
2 Year Manufacturer
Sound Level
26.6 dBA
Carrying Case
Yes, included
Expected Service Life
5 years
Disposable filter (1 included)
Operating Modes
Auto Start/Stop
Leak Compensation
Data Storage
Machine internal storage: 365 days summary data; Optional SD card (2GB): 365 days summary data, 30 days detailed data, 30 days high resolution flow
Data Viewing
On Screen Sleep Report; myAir app; AirView (provider only)
DC Power
24V, 3.75A
Smartphone App
ResMed myAir app (C2C model excluded)
  • AirCurve 10 ST VPAP Machine with Humidifier
  • Water Tub
  • Starter filters
  • Travel Bag
  • User Manual
  • Power Supply with AC Cord
  • 6' - 22mm Tubing, optional ClimateLineAir Tubing
  • SD Card already inserted
No customer reviews for now. Be the first to share your thoughts with other customers.
Question Do you bill Medicare and my Medigap for this?
Hello, I am sorry we do not bill insurance companies but can provide you with an invoice to bill
Posted: 08/23/2021
Displaying 1 to 1 (of 1 questions)
Result Pages:  1 
Stay in the loop with exclusive discounts!
By submitting your email address you agree to receive future emails from CPAPMAN with offers and promotions about CPAPMAN products and services.