Customer Support
855-235-7626
Mon - Fri: 5am - 5pm PT
Sat: 8am - 12am PT
Home > CPAP Machines > BiPAP ST, ST-A, and ASV > AirCurve 10 VPAP ST with HumidAir/Heated Tube - ResMed

AirCurve 10 VPAP ST with HumidAir/Heated Tube - ResMed


Tubing:
Free Shipping
Quantity

Rx required.

AirCurve 10 S/T VPAP Machine with HumidAir

Stellar VPAP Machine
The AirCurve 10 S/T VPAP Machine with the HumidAir System by ResMed is an advanced VPAP device which possesses a total of five operational modes and a plethora of advanced functions and eye-catching features. This machine is stocked with special iVAPS technology, expiratory pressure relief (EPR), automatic start and stop functions, Vsync automatic leak management, ramp function, mask fitting function and other great performance features as well. With this AirCurve 10 it will permit sleep apnea patients to receive adequate therapy without having to bear with significant levels of discomfort.

S/T and Other Operational Modes
The AirCurve 10 S/T has a total of five operational modes - spontaneous (S), spontaneous/timed (S/T), timed (T), VAuto and conventional CPAP mode. The primary mode of this particular VPAP device - spontaneous/timed (S/T) - will initiate a breath and begin IPAP. The duration of IPAP is controlled by your machine; this VPAP device will then automatically reduce pressure to EPAP. The S/T mode provides consistent relief and minimizes discomfort during therapy.

Expiratory Pressure Relief
Adapting to the pressure levels generated by sleep apnea machines is one of the most difficult challenges for new patients. The expiratory pressure relief (EPR) function for the AirCurve 10 S/T makes adjusting to such pressure levels much easier by providing consistent and substantial relief throughout your whole therapy session. When you inhale, the EPR function will artificially lower the pressure in order to deliver relief, and then elevate the pressure back to normal levels upon exhalation.

Smart Start/Stop
This device has SmartStart/SmartStop functions which simplify the processes of turning on and turning off your machine. When you take your first breath into your mask, SmartStart will automatically turn your machine on; then when you remove your mask SmartStop will automatically shut your device off. This technology not only makes it easier to operate your machine it also helps conserve machine power.

Vsync and TiControl
Vsync automatic leak management is an algorithm which monitors your breathing cycle and attempts to make proper adjustments when patients experience unintentional mask leakage. Mask leakage decreases your seal quality and can seriously compromise your results; Vsync is designed to make corrections automatically so you receive your desired pressure levels consistently throughout sleep. The Vsync algorithm works together with TiControl. TiControl enables patients to set minimum and maximum time limits so they can better address issues with their breathing cycle. Using TiControl will allow you to maximize the effectiveness of the Vsync system.

Advanced Humidification System
The humidification system for the AirCurve 10 S/T - the HumidAir - is a technologically sophisticated device which represents a significant improvement when compared with earlier humidifiers. The HumidAir system will maintain your desired temperature and humidity levels and help prevent some of the unpleasant potential side effects of therapy such as nasal congestion, irritation, sore throat and so forth.

ClimateLineAir Tubing(Optional)
The AirCurve10 is compatible with standard tubing, SlimLine tubing and the newly created ClimateLineAIR heated tubing. The ClimateLineAIR heated tubing was designed specifically to work for the AirCurve/Sense 10 and will contribute substantially to your humidification. You will avoid the troubles of rain-out, overheating and other pitfalls. One thing to keep in mind is the AirSense/Curve 10 ClimateLineAir tubing and general Climate-line tubing are not compatible

Ramp Function
In order to help patients fall asleep more naturally, the AirCurve 10 S/T is equipped with an advanced ramp function. The ramp function allows users to artificially suspend the influx of pressure for a specified period of time (between 5 and 45 minutes) so they will not take notice

Mask Fitting Feature
The AirCurve 10 S/T offers a special function which will visually indicate whether your mask has been fitted correctly and is therefore providing an effective seal. When your mask is installed, the AirCurve 10 S/T will display either a smiling face or a frown face - intuitively, a smiling face means that your seal is effective while a frown indicates that your seal is defective and your mask fit needs to be corrected.

Straightforward Operation
The AirCurve 10 S/T is remarkably easy to use. This VPAP machine has large buttons, a brightly lit screen and a convenient scrolling system which allows patients to make adjustments with ease. Impressively, the screen for the AirCurve 10 S/T is able to automatically adjust its brightness depending on surrounding light; this function ensures that patients will always be able to cleanly see their screen regardless of the time of day.

Pressure Range
The AirCurve 10 S/T VPAP machine has an operating pressure range of 3-25cm H2O. This pressure range is wider than normal and allows patients to have access to higher levels of pressure than they could potentially receive with conventional CPAP machines.

Advanced Data Management
Maintaining an aware of the status, direction and progress of your therapy is essential to optimizing your experience and receiving the best possible results. The AirCurve 10 S/T makes this a simple task with its superior data management system. This VPAP machine includes a data card and has an integrated wireless module; the wireless module enables patients to transfer their therapy information via the internet directly to their physician or healthcare provider. This VPAP device has the capacity to store up to 365 days of summary and compliance data, 30 sessions of detailed data and 7 sessions of high resolution flow data.

Key Features

  • HumidAir with Climate Control and ClimateLine (optional ClimateLineAir tubing)
  • Five operational modes - CPAP, VPAP, spontaneous, spontaneous/timed and timed
  • Comes with travel bag and 3 meter tubing
  • Advanced data management capabilities
  • Operating pressure range 3-25cm H2O
  • Adjustable trigger and cycle sensitivity
  • TiControl (time minimum/maximum)
  • Vsync leak compensation algorithm
  • Expiratory pressure relief (EPR)
  • Integrated wireless module
  • SmartStart/SmartStop
  • Includes SD data card
  • Mask fitting feature
  • Leak alert system
  • iVAPS technology
  • Easy to operate
  • Ramp function

Specifications

Modes of Operation:

CPAP, S, T, S/T

Pressure Range:

3-25 cm H2O

Ramp Up Time :

0-30 minutes (5-minute increments), Auto Ramp

Dimensions:

4.6 x 10 x 5.9 in.

Weight:

2.8 lbs

Smart Start:

Yes

Sound Level:

27 dBA

Filters:

Disposable Polyester fiber

Wireless Module:

Included

Data SD Card

Up to 365 days

Altitude Compensation:

Automatic up to 8500 ft

Electrical Requirements:

100 - 240, 50/60 Hz

DC Output:

24V, 3.75A

Power Supply:

90 watts

Humidification:

Integrated Heated Humidifier

Warranty:

2-Year Manufacturers Warranty

Operating Humidity:

10 - 95% relative humidity, non-condensing

Getting Acquainted Sleep Apnea Treatment

Model
37306, 37307
HCPCS
E0471, E0562, A9279, A4604
Machine Weight
2.45 lb
Machine Weight with Humidifier
2.75 lb
Machine Size Only
8" x 4.6" x 5.91" (LxWxH)
Machine Size with Humidifier
10" x 4.6" x 5.91" (LxWxH)
Humidification System
Built-in heated humidifier
Integrated Heated Hose
Yes
Humidifier Settings
0-8
Water Chamber Capacity
380 ml
Pressure Range
4-20 cm H2O (CPAP); 3-25 cm H2O (S, ST, T)
Pressure Relief
EPR 1 to 3 (CPAP only)
Ramp
Set Time 0-45 mins
Starting Ramp Pressure
4 cm H2O default (CPAP only)
AC Input
100-240V, 50-60Hz
AC Power Supply
90W
Power Cord Length
6 ft
DC Converter
Yes
Battery Option
Yes
Supports Remote Monitoring
Yes, built-in cellular modem (C2C model excluded)
Bluetooth
No
Data Download
Yes via SD card
SD Card Included
Yes, 2GB
AHI Display
Machine, app (requires modem)
FAA Approved
Yes
Altitude Adjustment
Automatic up to 8500 ft
Oxygen Use
Yes up to 15L/min (CPAP, S, ST, T)
Oximetry Compatibility
Yes, ResMed AirSense/AirCurve 10 Oximetry Kit (370004)
Compatible with All Masks
Yes
Manufacturer
ResMed
Warranty
2 Year Manufacturer
Sound Level
26.6 dBA
Carrying Case
Yes, included
Color
Silver/Gray
Expected Service Life
5 years
Filters
Disposable filter (1 included)
Operating Modes
CPAP, S, T, S/T
Auto Start/Stop
Yes/Yes
Leak Compensation
Yes
Data Storage
Machine internal storage: 365 days summary data; Optional SD card (2GB): 365 days summary data, 30 days detailed data, 30 days high resolution flow
Data Viewing
On Screen Sleep Report; myAir app; AirView (provider only)
DC Power
24V, 3.75A
Smartphone App
ResMed myAir app (C2C model excluded)
  • AirCurve 10 ST VPAP Machine with Humidifier
  • Water Tub
  • Starter filters
  • Travel Bag
  • User Manual
  • Power Supply with AC Cord
  • 6' - 22mm Tubing, optional ClimateLineAir Tubing
  • SD Card already inserted
No customer reviews for now. Be the first to share your thoughts with other customers.
Question Do you bill Medicare and my Medigap for this?
Answer
Hello, I am sorry we do not bill insurance companies but can provide you with an invoice to bill
Posted: 08/23/2021
Displaying 1 to 1 (of 1 questions)
Result Pages:  1 

Compare Similar Products

Basic Features
Manufacturer
ResMed
Breas
Warranty
2 Year Manufacturer
2 years
Sound Level
26.6 dBA
<30 dBA (at 10 cm H2O)
Carrying Case
Yes, included
Yes, included
Color
Silver/Gray
Gray
Expected Service Life
5 years
5 years
Filters
Disposable filter (1 included)
Reusable filter, disposable filter (1 of each included)
Operating Modes
CPAP, S, T, S/T
CPAP, PSV, PCV, PSV + Target Volume, PCV + Target Volume
Auto Start/Stop
Yes/Yes
No/No
Leak Compensation
Yes
Yes
Dimensions
Machine Weight
2.45 lb
8.8 lb
Machine Weight with Humidifier
2.75 lb
9.73 lb
Machine Size Only
8" x 4.6" x 5.91" (LxWxH)
8.78" x 7.48" x 9.57" (LxWxH)
Machine Size with Humidifier
10" x 4.6" x 5.91" (LxWxH)
N/A
Humidifier Features
Humidification System
Built-in heated humidifier
Optional heated humidifier
Integrated Heated Hose
Yes
No
Humidifier Settings
0-8
0-9
Water Chamber Capacity
380 ml
approximately 400ml
Power Features
AC Input
100-240V, 50-60Hz
100-240V, 50-60Hz
AC Power Supply
90W
Built-in
Power Cord Length
6 ft
6.5 ft
DC Converter
Yes
Yes
Battery Option
Yes
Yes, internal and external battery
Pressure Features
Pressure Range
4-20 cm H2O (CPAP); 3-25 cm H2O (S, ST, T)
4-20 cm H2O (CPAP); 4-40 cm H2O (IPAP)/ 2-20 cm H2O (EPAP)
Pressure Relief
EPR 1 to 3 (CPAP only)
eSync Technology
Ramp
Set Time 0-45 mins
Off, 10 - 60 min (PCV, PSV, and CPAP mode)
Starting Ramp Pressure
4 cm H2O default (CPAP only)
2 cmH2O
Additional Features
AHI Display
Machine, app (requires modem)
Machine
FAA Approved
Yes
Yes
Altitude Adjustment
Automatic up to 8500 ft
Automatic
Oxygen Use
Yes up to 15L/min (CPAP, S, ST, T)
Yes up to 15L/min
Oximetry Compatibility
Yes, ResMed AirSense/AirCurve 10 Oximetry Kit (370004)
No
Compatible with All Masks
Yes
Yes
Software Features
Supports Remote Monitoring
Yes, built-in cellular modem (C2C model excluded)
No
Bluetooth
No
No
Data Download
Yes via SD card
Yes via Breas iCom data cable/Compact Flash Memory Card
SD Card Included
Yes, 2GB
N/A
newsletter
Stay in the loop with exclusive discounts!
By submitting your email address you agree to receive future emails from CPAPMAN with offers and promotions about CPAPMAN products and services.