Customer Support
855-235-7626
Mon - Fri: 5am - 5pm PT
Sat: 8am - 12am PT
Home > CPAP Masks > Nasal CPAP Masks > AirFit N10 Nasal CPAP Mask - ResMed

AirFit N10 Nasal CPAP Mask - ResMed


Size:
Quantity

The AirFit N10 has magnetic headgear clips. Utilizing magnetic strips makes it easy to secure a fit without compromise. Developed by ResMed to be lightweight and functional.

Airfit N10 Nasal Mask - ResMed

The ResMed Airfit N10 nasal CPAP mask belongs to the AirFit line of ResMed products. This mask is a compact nasal mask designed to be simple, intuitive, and comfortable. Its triangular SpringAir cushion encases your nose, resting on your upper lip below your nostrils and on the bridge of your nose. With only three parts, the cushy nasal mask comes apart and goes back together smoothly. Many users describe the Airfit N10 as the softest, most gentle mask they have ever used, and provides maximum comfort.

Comfort Features: 

  • SpringAir Cushion
  • SoftEdge Headgear
  • Under the Eye Frame

Soft, springy, and secure

The SpringAir cushion has a dual wall to provide a cushy, extra-smooth interface around your nose and on your face. The Spring Air cushion attaches easily to the frame with a quick click. The headgear has rolled edges to keep the feel of the fabric smooth against your skin. In addition to this, the soft edge headgear features slimmed-down straps resulting in more comfort and fewer facial marks. Soft sleeves are available separately if you want an even softer feel against your cheeks. The headgear attaches to the frame with key clip self-aligning magnets and is also self-aligning so getting it positioned adequately is hassle-free.

Visual freedom

The sleek under-the-eye frame keeps your line of sight unobstructed. The compact frame design means your face has plenty of room for glasses, and you can also watch TV or read as you get ready for bed.

Minimal parts

Many masks have numerous tiny parts like elbows and connectors to clean and keep track of. The AirFit N10 has these essential small parts molded directly into the frame. The entire mask comes apart into just three pieces (cushion, frame, and headgear), so cleaning and assembly are simple intuitive tasks. A FlexTube built into the frame stretches and bends 360 degrees, rendering leaks after repositioning a non-issue. Circular diffused venting holes are also crafted into the center of the frame to direct exhaled air quietly away from you and your sleep partner.

The lightweight and flexible AirFit N10 is a nasal mask for most people but might be an excellent choice for you if: 

  • Facial comfort is important to you.
  • You like to wear glasses, read, or watch TV after you put your CPAP mask on.
  • You want fewer parts to keep up with.
  • You breathe mostly through your nose.

Sizing and fitting

Cushion size
Selecting the right size mask and headgear is critical to your comfort and satisfaction with any sleep apnea mask.
The best size cushion for you surrounds your nose, instead of resting on it. The Airfit N10 cushions are available in three sizes (small, standard, and wide). Select a cushion size that sits on your upper lip without occluding your mouth or your nostrils. The tip of the triangular cushion should be just above the tip of the nose and not near or in your eyes.
Please print out the available size guide and place it under your nose to determine the best size for you.

Fitting:

  1. Orient the headgear so that the ResMed logo is facing out.
  2. Disconnect the lower straps and hold the cushion over your nose.
  3. Slide the headgear up and over your head.
  4. Bring the lower strips under the ears and attach them with the magnetic clips to the frame.
  5. Adjust the upper straps first, tightening them until the mask sits comfortably under the nose.
  6. Adjust the lower straps next, tightening them until the mask feels stable.
  7. Connect to your CPAP machine and turn it on.
  8. Make additional small adjustments to the cushion and headgear to remove any creases or twists.

Resolving Leaks

  • Leaks often resolve by merely reseating the mask. To reseat the mask, lift it gently off your face then lower it back down onto your face.
  • Prevent cushion creases by always starting with the mask held in the proper position against your nose. If the cushion slides down during fitting, it may crimp in places, creating gaps that cause leaks. To resolve creases, remove the mask entirely and start the fitting process over.
  • Clean the cushion. Dirt, oil, and makeup can hinder the cushion from forming the best seal.
  • Over-tightening headgear can make leaks worse, cause discomfort, red marks, and skin irritation. The upper straps on the AIrfit N10 are the key to the seal. The lower straps should require minimal tension to stabilize the mask.
  • Consider changing the sizes of the cushions or headgear if you need to tighten the headgear excessively.

Adjusting for noise:

  • Check for leaks.
  • Check the diffusion ports at the center of the frame. Clean with a soft bristle brush.
  • Check for proper mask assembly.

Cleaning and maintenance:

Recommended cleaning frequency:

  • Daily: cushion and frame
  • Weekly: headgear

Cleaning Process:

  1. Wash in warm soapy water using a mild dish soap.
  2. If the circular vents require cleaning, use a soft bristle brush.
  3. Rinse in fresh water.
  4. All parts should be air-dried out of direct sunlight.

Important: Do not clean with products containing alcohol, scents, antibacterial agents, antiseptics, bleach, chlorine, or moisturizers. Do not soak any parts for more than 10 minutes.

In the package

  • SoftEdge headgear
  • SpringAir CPAP cushion 
  • Mask assembly kit (frame) 

Replacement parts:

  • Headgear 
  • CPAP mask cushion 
  • Mask assembly kit (frame) R

Component materials:

  • Cushion: Silicone Rubber
  • Cushion Clip: Polyamide
  • Headgear (fabric components): Nylon; Lycra
  • Headgear (foam components): Polyurethane Foam
  • Headgear Clip Body: Polyamide
  • Magnet: Ceramic
  • Frame Body: Polyamide
  • Short Tube: Thermoplastic Polyester Elastomer (TPE)
  • Swivel: Polyamide
  • Swivel Adapter: Polypropylene
  • Soft Wrap: Nylon; Lycra

Caution: Magnets used in this mask are within ICNIRP guidelines for general public use. Some active medical implants—such as a pacemaker or defibrillators—may be affected by localized magnetic fields. The magnetic clips in this mask should be kept at least 2 inches. (50 mm) away from any active medical implant.

Model
63200, 63202, 63229
HCPCS
A7034, A7035
Manufacturer
ResMed
Warranty
90 days against manufacturer defects
Tube Connection
Front of the face
Mask Type
Nasal
Headgear Clips and Type
Yes; Magnetic Clips
Headgear Size with Mask
Standard
Other Headgear Sizes Available
Yes; Small
Other Headgear Styles Available
No
FitPack Available
No
Active Sleeper
Yes
Stomach Sleeper
No
Claustrophobic
Yes
Specifically Designed For Women
No
Facial Hair
No
Cushion Interchangeable with Different Type
No
Steve B
10/20/2022
AirFit N10 Nasal Mask
I mistakenly bought a full face mask and it was a total failure so I thought I would try this one. IMO it's a 3 out of 5 stars. It is small and very light weight and that is a plus. But it's also not super tough because of that so if you don't get it just right it will leak, it you toss and turn a little it will leak and if you have sinus issues where it progressively gets harder to breath through your nose at night like I do then it will leak and you wake up.
Downvote
Ernie G
04/09/2020
I have used this mask before and have liked it. This mask however I am having an issue with. Every time I put it on my nose begins to burn where the mask sits. I have soaked it in soapy water and also use a SoClean everyday. I am not sure if there is something different in the composition of this mask that i am allergic to or just what is going on yet. I have not been able to talk to a doctor yet because of the Covid19 situation.
Downvote
Logan T
06/12/2014
I actually quite like this mask. I was skeptical at first because it was new and I use the comfortgel from respironics with the blue gel, but this one is really light and almost as comfortable. Not sure which one I prefer, they both have their advantages but overall I am satisfied and think I will use this for the foreseeable future because the headgear isnt uncomfortable on the side of my face while I am wearing it. Thanks
Downvote
Kelsey N
08/27/2014
I am a first time user of your nasal mask and I am very happy with it. This mask is very light and easy to put on and for myself its very convenient because I do get up several times at night to check on my baby. The cushion for this mask comes into 2 sizes, i love this nasal mask it doesn't block my view if I want to watch or read .
Downvote
Danielle R
05/15/2015
This is a great mask for those of you who want something soft on the face. My nose didn't have any blemishes when I woke up from using it and it has a great seal. Definitely worth trying as it is very soft and easy to put on.
Downvote
Matthew M (Verified Purchase)
08/03/2022
Quality product and fast shipping
The AirFit N10 Nasal CPAP Mask - ResMed was the right replacement part for my machine and was delivered very quickly. I ordered the same piece from another company and waited weeks. CPAPman.com sent it to me right away.
Downvote
Wally S
09/26/2014
This is the softest nasal mask I have ever tried. It feels completely perfect and natural for me. The headgear and the cushion is like heaven sent. By far the best nasal mask out there
Downvote
Displaying 1 to 7 (of 7 reviews)
Result Pages:  1 
newsletter
Stay in the loop with exclusive discounts!
By submitting your email address you agree to receive future emails from CPAPMAN with offers and promotions about CPAPMAN products and services.