DeVilbiss IntelliPAP™ Standard Plus CPAP Machine with Carrying Case, 6' Air Tubing and 5 Year Warrantee

The SleepCube Standard Plus is a fixed pressure CPAP with SmartFlex expiratory relief comfort feature designed for the effective treatment of Obstructive Sleep Apnea. It is equally suitable for use in the home or hospital and its robust ergonomic design and its small size makes it the ideal traveling companion. As with all SleepCube CPAPs the optional heated humidifier can be easily connected. SmartFlex - Expiratory Relief DeVilbiss Healthcare is proud to introduce SmartFlex to the IntelliPAP™ Standard Plus and Auto Plus CPAPs. It reduces the pressure when the patient is exhaling to aide patient comfort. SmartFlex has three settings and each setting reduces the CPAP pressure by 1 cm H2O during exhalation. Setting 1 - reduction of 1 cm H2O Setting 2 - reduction of 2 cm H2O Setting 3 - reduction of 3 cm H2O SmartFlex can be used for the ramp period to enable the patient to go to sleep easier or for the whole night. If an apnea, hypopnea or a snore is detected the SmartFlex will turn off and will only resume once events are no longer detected. Flow Rounding Flow Rounding is a feature that changes the slope of the pressure waveform during the transition from prescription pressure to the SmartFlex setting and vice-versa. This enables a smooth transition and the chances of waking the patient are reduced. There are 5 levels of flow rounding with level 1 having the steepest slope and quickest transition and level 5 having the gentlest slope and slowest transition. These settings should be adjusted for optimal patient comfort. Smallest surface of all leading CPAP devices with heated humidification system attached. Among the quietest CPAPs on the market - only 26 dBA Introduction to CPAP therapy and instructional video included. Patient air tubing extends from the back of unit to enhance visual appeal. Large slip-resistant pads on bottom of unit to minimize movement on bedside table during the night CPAP can run from a 12V DC source (not heated humidifier) and will switch automatically to AC power if connected and available. Auto-switching universal power supply of 100 - 240 V and 50 - 60 Hz, and automatic altitude compensation between 0 and 2750m (9000 ft) Included in every SleepCube is the SmartCode data compliance feature which encodes usage data into a series of letters and numbers that can be easily decrypted using free software. Large backlit LCD and easy to follow patient menu Auto on / off Delay pressure ramp eases the machine to the prescribed pressure. Extra air inlet and fine particle filter included. Specifications: Product Weight: 2.6 lbs. with heated humidification system Product Length/Depth: 7.0" Product Height: 4.25" Sound Level: 26 dBA Universal Power Supply: Yes AC (100-240 VAC, 50/60 Hz) Cord Length: 8 feet DC Operable: Yes (12 VDC) ABOB Analog Output for PSG: Yes (pressure, patient flow, leak flow, patient event markers, est. tidal volume) Automatic Leak Compensation: Yes Motor Hour Meter: Yes Therapy Compliance Meter: Yes Automatic Altitude Adjustment: Yes Warrantee Information: The DeVilbiss(r) CPAP product line offers one of the most competitive guarantees on the market today. DeVilbiss(r) CPAP systems are warranted against defects in materials and workmanship for periods up to five years depending on the specific model. For specific details regarding this product, please refer to complete warranty information in the product service manual or patient guide. Manufacturer’s Note: Product images supplied by DeVilbiss Healthcare. © DeVilbiss Healthcare. Used with Permission. The DeVilbiss Healthcare IntelliPAP was designed and intended for sale and use to patients in the US, Canada and Mexico only. Medical product requirements, regulations and support differ by country. For an international provider, go to www.DeVilbisshc.com.