Nasal Pillows, Adams Circuit, nose pillows for CPAP, sleep disorders, snoring, apnea from The CPAP Store and the CPAP Man.

Helpful Hints Making Your CPAP, BLPAP, and ATPAP Work Better

Updated 3/30/07

---

Fitting the CPAP Man's Custom Made Headgear

Step 1: Adjust the HEADBAND to fit your head comfortably. Open the head band at the front and adjust each side equally.		Step 4: Adjust the FRONTAL ADJUSTMENT so the HEADBAND is slightly above the eye brows. Press the Velcro together to maintain position.
See Setup for Nasal Pillows below
Step 2: Open the FRONTAL and OCCIPITAL ADJUSTMENTS. Align the STABILIZER STRAP so that it goes directly over the top of the head.		Step 5: Transfer the over-the-head hose to your new custom headgear. You will notice the top hose loop allows the hose to run straight from the top of the head.
Step 3: Adjust the DELTA OCCIPITAL LOCK to fit just under the occipital bump. Press the Velcro together to maintain position.		Step 6: For greater comfort, drill a 9/64" hole in the top angle of the shell, near the angle adapter, and cover the original hose with a piece of tape. This will allow the exhausted air and exhaled breath to be discharged above the cover line and not reflect back in your face.
SPECIAL NOTE: Since the Custom Headgear is made out of canvas, you can wash it like denim pants. Your Custom Headgear should give you many years of excellent service. If not, contact us!

Setup for Nasal Pillows

---

Proper setup of nasal pillows

Delta Occipital Lock

Prevent hose leverage created by hose hitting pillow or mattress.

---

For more Helpful Hints click here

---

Sponsored Advertisement