The Sandman Info CPAP device was designed to be accurate with intelligent pressure stability and respiratory events detection. Pressure and flow sensing capabilities allow for detection and recording of apneas, hypopneas, inspiratory flow limitations and snoring so you can be confident critical patient data is captured. The auto-calibration feature provides precise pressure delivery for nearly all mask and tubing combinations.

Like all Sandman therapy devices, Sandman Info is simple to operate and robust. It has a backlit front-facing screen and buttons so that patients can make simple adjustments without needing to sit up and turn on the light. It is light-weight, has an integrated power supply, single power cord and unique integrated heated humidifier for more comfortable therapy.

 FEATURES:

Compliance Capabilities
Recording of apneas and hypopneas with central/obstructive split
Recording of inspiratory flow limitations and snoring.
Leak detection and reporting for each respiratory event.
Approximately 200 sessions of 8 hours stored in embedded memory
Approximately 50 sessions of 8 hours available on memory card.
Comprehensive Sandman therapy software.

Performance Information
Digital Signal processor allowing for precise flow control
Automatic altitude/barometric compensation
Data download via memory card.
Direct USB connectivity using Sandman therapy software to:
---Direct data download
---Upload new settings
---Visualize actual sessions

Ease of Use
Front-facing display screen
Large, backlit buttons
Fluid-resistant display screen
Automatic patient reminders
Automatic light dimmer
Only one cord for CPAP and heated humidifier
Ability to run on an external battery

 SPECIFICATIONS:

Air pressure and flow generated by a centrifugal blower with dynamic pressure regulation

PRESSURE OUTPUT: 3 to 20 cm H2O
FLOW OUTPUT: 190 LPM @ 20 cm H2O
NOISE LEVEL: 26 dB @ 1 meter @ 10 cm H2O
RAMP DURATION: 0 to 45 minutes in 5 minute increments

SIZE: 6.9" W x 7.5" D x 4.7" H
WEIGHT: 2.5 lbs (2.65 lbs with heated humidifier)

POWER SUPPLY: Input range 100-240 VAC, 50-60 Hz
OPERATING ALTITUDE: 0 to 9,000 feet

FILTERS: Cleanable foam and ultra-fine high-efficiency

$514.00

$38.00

The Sandman Intro CPAP device was designed with input from users and clinicians to improve patient compliance with therapy. The result is a device that easily fits into users' lives and delivers quality performance, comfort and convenience.

While offering one of the smallest overall footprints available, the compact Sandman Intro CPAP device incorporates a fully integrated heated humidifier for enhanced breathing comfort. The humidifier is discreetly located at the rear of the device with a water chamber and filter that are easy to remove for cleaning. And, even with the integrated humidifier, the device remains lightweight and robust enough for nightly use at home or on the road.

 Features:

EASE OF USE
Front-facing display screen
Large, backlit buttons
Fluid-resistant display screen
Can run on external battery
Memory card Automatic patient remainder

FULLY INTEGRATED
Integrated HC heated humidifier
Single electrical connection for both CPAP and heated humidifier
Sandman therapy software

AUTOMATED
Automatic altitude and barometric pressure change compensation
Internal universal switching power supply
Automatic leak compensation
Automatic light dimmer

 Specifications:

Air pressure and flow generated by a centrifugal blower with dynamic pressure regulation

PRESSURE OUTPUT: 3 to 20 cm H2O
FLOW OUTPUT: 200 LPM @ 20 cm H2O
NOISE LEVEL: 26 dB @ 1 meter @ 10 cm H2O
RAMP DURATION: 0 to 45 minutes in 5 minute increments

SIZE: 6.9" W x 7.5" D x 4.7" H
WEIGHT: 2.5 lbs (2.65 lbs with heated humidifier)

POWER SUPPLY: Input range 100-240 VAC, 50-60 Hz
OPERATING ALTITUDE: 0 to 9,000 feet

FILTERS: Cleanable foam and ultra-fine high-efficiency

$38.00

iSleep 20+ with eAdapt is an advanced high performance and sophisticated CPAP designed for easy use at home. Thanks to the unique eAdapt technology, your comfort is enhanced significantly.

FEATURES:

In conventional CPAP mode, especially at higher pressure levels, some patients may find themselves struggling against the pressure level.

By adapting the expiratory pressure to the patient's inspiratory effort, eAdapt reduces the work of breathing, and gives a true sense of improved breathing comfort. As per physician's recommendations, eAdapt can be enables either for the ramp duration only or for the entire night. With its 5 levels, eAdapt gives the patient the option to fit the iSleep 20+ therapy to his/her own preference.

The memory card capability allows for quick and easy download of long-term patient compliance data and detailed log.

The PC software does not only provide compliance reports but also the patient's AHI and also features detailed view on flow, pressure and leakage data.

When not in use, the hose can either be easily disconnected or stored behind the unit making it look like a normal item on the nightstand. The design is adapted for use with a wide range of masks and interfaces.

The lightweight design and the built-in carrying handle make it easy to take with you when traveling. The power adapter enables operation in any corner of the world. It can even be powered from a car or recreational vehicle when enjoying an active everyday life (12 VDC adapter required)

SPECIFICATIONS:

CPAP 4 to 20 cmH2O

Integrated humidifier HA 01 1 to 9

Maximum flow > 125 liters/min
at 1/3 of max press. : 108 l/min
at 2/3 of max press.: 132 l/min
at max pressure: 132 l/min

Maximum limited pressure during single fault condition 30 cmH2O

Breathing resistance under single-fault condition 0.9 cmH2O at 30 l/min
3.2 cmH2O at 60 l/min

eAdapt Pressure relief during exhalation
5 levels limited to 4 cmH2O below set CPAP pressure

Digital output Yes
Sound level at 10 cmH2O Less than 28 dB(A)

POWER SUPPLY
Mains supply 100 to 240 V AC
External DC supply 24 V DC, 12V adapter available
OPERATING CONDITIONS
Recommended leakage 20 to 40 liters/minute at 10 cmH2O
Minimum leakage 12 liters/minute at 4 cmH2O

DIMENSIONS
W x H x D: 6 7/8" X 6 7/8" X 7 15/16" (173 x 172 x 201 mm) (with humidifier HA 01)
Weight: 4.2 lbs (1,9 kg )

iSleep 20 is a conventional high-end CPAP with low noise and optional integrated heated humidifier HA 01. Automatic altitude compensation, patient compliance data log and PC software. Intuitive user interface. Portable and easy to carry. Designed for "Home".

Now with AHI
In addition to giving extended compliance data, the iSleep 20 now also provides the care provider and/or prescribing Clinician with a follow-up of the efficacy of the therapy - through Apnea/Hypopnea Index (AHI).

FEATURES

iSleep 20 is an advanced CPAP designed for easy use at home. The upright yet stable design takes a minimum space on the nightstand and suites perfectly in any bedroom.

In addition to giving extended compliance data, the iSleep 20 now also provides the care provider and/or prescribing clinician with a follow-up of the efficacy of the therapy – through AHI, based on motor-current.

The built-in continuous analysis of the therapy given will help the clinician to decide if the prescribed pressure setting is optimum for the
patient with minimum of time spent.

The ‘truly’ integrated heated humidifier provides adjustable upper airway humidification for increased compliance.

The hose is connected in the rear of the unit and can easily be positioned using the built-in swivel. When not in use, the hose can either be easily disconnected or stored behind the unit making it look like a normal item on the nightstand. The design is adapted for use with a wide range of masks including the iMaskTM.

The Home mode prevents changes of settings that should only be changed by a clinician yet allowing the user to adapt other settings for
personal preference.

Improved visibility of the unique “snooze” function, for less disturbance of the bed partner when taking off the mask during treatment.

Lightweight design and easy to take with you when traveling, including power adapter. It can even be powered from a car or recreational vehicle when enjoying an active everyday life.

SPECIFICATIONS:

CPAP 4 to 20 cmH2O

Integrated Humidifier 1 to 9

AHI Apnea/Hypopnea Index

Maximum flow > 125 liters/min at 1/3 of max pressure: 90 l/min at 2/3 of max pressure: 130 l/min
at max pressure: 160 l/min

Maximum limited pressure during single fault Condition 30 cmH2O

Breathing resistance under single fault condition 0.8 cmH2O at 30 l/min
2.8 cmH2O at 60 l/min

Digital output Yes

Sound level at 10 cmH2O Less than 30 dB(A)

INDICATIONS
Internal function failure Message on the display

POWER SUPPLY

Mains supply 100 to 240 V AC
External supply 24 V DC

OPERATING CONDITIONS

Recommended leakage 20 to 40 l/min at 10 cmH2O
Minimum leakage 12 l/min at 4 cmH2O

DIMENSIONS
W x H x D 6 7/8" X 6 7/8" X 7 15/16" (173 x 172 x 201 mm )(with Humidifier HA 01)

Weight 2.9 lbs (1,3 kg)

The S8 Escape II is the entry-level CPAP device in ResMed's S8™ Series II, the smallest and quietest product range on the market. The S8 Escape II features new whisper-quiet operation that is 60% quieter than before, new and improved EPR™ (Expiratory Pressure Relief) with Easy-Breathe technology, usage-based compliance download for accurate patient monitoring, and a data card for easy two-way data transfer. Easy-Breathe is ResMed's revolutionary new therapy system that combines new software, a quieter motor and improved EPR for maximum comfort and a quiet night's sleep. With newly improved EPR, the S8 Escape II provides three levels of pressure relief delivered in a smooth waveform synchronized with the patient's natural breathing pattern.

 Features:

Whisper-quiet motor - Setting a new industry standard in quiet therapy and comfort, ResMed's new sophisticated motor design delivers superior performance at a lower effort while cutting device noise significantly. By reducing noise, Easy-Breath technology enables patients and their bed partners to sleep peacefully through the night.

Easy-Breathe Technology - Easy-Breath technology combines new software, a quieter motor and improved EPR for maximum comfort and a quiet night's sleep.

Pressure relief for more natural breathing - Featuring ResMed's improved EPR with Easy-Breath technology, the S8 Elite II offers pressure relief delivered in a smooth waveform that mimics patient breathing. With a choice of three different EPR comfort levels, the S8 Elite II with Easy-Breath technology allows customized comfort for breathing that feels natural.

 Specifications:

Pressure Range: 4 - 20 cm H2O

Data Storage: Data includes usage, leak, AHI, events and pressure
Via cable: 365 sessions of summary data, five sessions of detailed data.
Via ResScan Data Card: 180 sessions of summary data, five sessions of detailed data.
Data also available via the LCD menu
High resolution data: five sessions of flow data recorded at 25 Hz with S8 ResLink

Dimensions: 6.5" W x 5.7" D x 4.6" H

Weight: 3.09 lbs

Noise Level: Radiated sound pressure is measured at <24 dBA at 10 cm H2O at 1 meter according to ISO 17510-1

Power Supply: 100-240 VAC, 50/60 Hz, 12 V or 24 V DC via ResMed's DC-12 converter.

Air Filter: Two-layered, powder-bonded, polyester non-woven fiber

Now with 30% more humidity, ResMed's latest technology ensures the H4i heated humidifier delivers the most humidity output of an integrated device. The H4i clicks easily into place and supports ResMed's full S8 platform---from entry-level CPAP to premium VPAP bilevels. The compact design is unobtrusive in the bedroom and easily packed for travel.

It is designed to offer relief from the symptoms of dryness and congestion associated with CPAP therapy without compromising therapy effectiveness or ease of use. The flip-top lid design eliminates the need to remove the tube for refilling. The seamlessly integrated unit simply snaps into place whenever required and is powered by ResMed's S8 devices--no additional power cords or cables required. The easy-to-use dial control and power-on light plus heating indicator are other user-friendly features of the H4i.

Up to 40% of nasal CPAP users experience nasal congestion and dryness of the nose and throat. Research proves that the warm, moist air that humidification provides can relieve symptoms of dryness and make therapy more comfortable. In fact, compliance gains may be realized sooner if patients start with heated humidity at CPAP initiation.

Studies show that ResMed's HumidAire 4i and H4i humidifiers outperform competitive products, making ResMed's devices more effective not only with humidification, but al;so further enhancing therapy comfort and compliance

The H4i is specifically designed to produce greater humidification outputs to support the higher pressure delivered during bilevel therapy. However, bot the H4i and H4i are more than adequate for CPAP and APAP.

 
© ResMed 2008 Used with Permission

1 Richards et al. Am J Respir Crit Care Med 1996
2 Massie et al. Chest 1999
3 Rakotonanahary et al. Chest 2001
4 Neill et al. Eur Respir J 2003

Tested to ISO 8185, at 10 cm H2O bias flow and maximum device output

$260.00

S8 Elite II is the premium auto-adjusting device in ResMed's S8 Series II, featuring the following benefits:

New whisper-quiet operation is 75% quieter than before

New Easy-Breathe technology - ResMed's revolutionary new therapy system

New and improved EPR with Easy-Breath technology - for enhanced patient breathing comfort

Usage-based compliance download for accurate patient monitoring

Data card - a standard feature included for easy two-way data transfer

 Features:

Whisper-quiet motor - Setting a new industry standard in quiet therapy and comfort, ResMed's new sophisticated motor design delivers superior performance at a lower effert while cutting device noise significantly. By reducing noise, Easy-Breath technology enables patients and their bed partners to sleep peacefully through the night.

Easy-Breathe Technology - Easy-Breath technology combines new softwre, a quieter motor and improved EPR for maximum comfort and a quiet night's sleep.

Pressure relief for more natural breathing - Featuring ResMed's improved EPR with Easy-Breath technology, the S8 Elite II offers pressure relief delivered in a smooth waveform that mimics patient breathing. With a choice of three different EPR comfort levels, the S8 Elite II with Easy-Breath technology allows customized comfort for breathing that feels natural.

 Specifications:

Pressure Range: 4 - 20 cm H2O

Data Storage: Data includes usage, leak, AHI, events and pressure
Via cable: 365 sessions of summary data, five sessions of detailed data.
Via ResScan Data Card: 180 sessions of summary data, five sessions of detailed data.
Data also available via the LCD menu
High resolution data: five sessions of flow data recorded at 25 Hz with S8 ResLink

Dimensions: 6.5" W x 5.7" D x 4.6" H

Weight: 3.09 lbs

Noise Level: Radiated sound pressure is measured at <24 dBA at 10 cm H2O at 1 meter according to ISO 17510-1

Power Supply: 100-240 VAC, 50/60 Hz, 12 V or 24 V DC via ResMed's DC-12 converter.

Air Filter: Two-layered, powder-bonded, polyester non-woven fibre

The new DeVilbiss IntelliPAP Standard CPAP System has been designed with patients and providers in mind, incorporating many of the recommendations solicited through research to optimize patient adherence. IntelliPAP's combination of comfort, education and adherence tracking with SmartCode helps to ensure patient compliance - all in a highly efficient platform that makes great business sense to you.

From its reliable electronics and water resistant housing to its durable Lexan humidifier chamber and stainless steel heat transfer plate, IntelliPAP is built for years of dependable performance and patient satisfaction. Just what you would expect from DeVilbiss - the widely recognized leader in respiratory technology.

 FEATURES:

Quietest CPAP Unit on the market - only 26 dB

Integrated Heated Humidification

Auto On/Off automatically starts the flow of air after breathing into the mask and stops the flow of air when mask is removed

Exclusive humidifier chamber design maximizes humidification and minimizes leaks

Exceptionally small footprint, smallest integrated unit among top-selling CPAP

Delay pressure ramp

Best-in-industry warranty: 3 year on IntelliPAP, 2 year on humidification system.

 SPECIFICATIONS:

Size: 6.4" H x 6.5" W x 8.4" D

Weight: 4.45 lbs with humidifier

Pressure Range: 3 to 20 cm H2O (0.5 cm increments)

Power Supply: 100 to 240 VAC, 50/60 Hz

Automatic Altitude Compensation up to 9,000 feet

  Meet the REMstar Pro M Series

The new shape of sleep therapy from Respironics is smaller, sleeker, lighter and simpler than ever. Every REMstar Pro M Series device features an easy-to-use three-button interface, covered navigation buttons with expanded capabilities, all designed to fit your life style and your night stand.

 Features: 

* Quiet
* Automatic Altitude Compensation
* Adjustable Ramp Pressure
* Adjustable Ramp Time in 5 minute increments
* Automatic On feature
* Mask Removal Indicator
* Built-in Memory
* Two Stage Filter System
* International Power Supply and 12 VDC
Note: The DS200H, DS400H, and DS500H requires a modified sine wave DC to AC Inverter to run the Heated Humidifier off a 12 VDC battery.

Specifications:

C-Flex for more comfortable therapy

Pressure: 4 to 20 cm H2O

Ramp: in 5 minute increments

Size 8 3/4" L x 8 1/4" W x 3 3/4" H

Weight: 5.15 pounds with humidifier and power supply

Power Supply: 100 to 240 VAC, 12 VDC

Warrantee: 2 years (1 year on humidifier)

The new shape of sleep therapy from Respironics is smaller, sleeker, and simpler than ever, ideal for travel or home use.

Every REMstar Pro M Series with Heated Humidifier device features an easy-to-use three-button interface, covered navigation buttons with expanded capabilities, and a new integrated humidifier design that features an easy-turn dial and a hidden water chamber, all designed to fit your life style and your night stand. 

$5.65

$4.85

$6.78

$179.95

$138.67

Designed specifically for most popular CPAP machines, the Super CPAP battery backup system allows people with Sleep Apnea to rest easy anywhere in the world. Stop searching for an AC wall outlet and rearranging the hotel furniture to position the bed within reach of a wall plug. Super CPAP's newest external power solution opens up a world of travel possibilities.

AIR TRAVEL: The lightweight Super CPAP battery is small enough to take on a red-eye flight and powerful enough to keep CPAP machines running throughout long flights. The leather travel case and international AC charger makes an ideal travel companion.

Looking for a small, sleek, ultra-portable, and affordable way to power your CPAP or BiPAP? Need a backup for your CPAP or BiPAP in case of power failure? Look no further than the new Super Battery Pack from Super CPAP. This CPAP battery is sure to work with your device and provide a full night's sleep without recharging.

The new shape of sleep therapy from Respironics is smaller, sleeker, and simpler than ever. Every REMstar M Series device features and easy-to-use three-button interface covered navigation buttons with expanded capabilities, and a new integrated humidifier (optional) that features an easy-turn dial and a hidden water chamber, all designed to fit your life, and the night stand.

 Features and Specifications:

C-Flex for more comfortable therapy

Pressure: 4 to 20 cm H2O

Ramp: in 5 minute increments

Weight: 2.2 pounds

Power Supply: 100 to 240 VAC, 12 VDC

Warrantee: 2 years

$5.65

$4.85

$6.78

$179.95

$138.67

Prescription Required 

 Enjoy freedom and flexibility with the integrated evo eveRest2 CPAP system in place of conventional, component separated CPAP systems. Now it's easier than ever to travel--even go camping--with CPAP.

With the optional rechargeable battery back, there's no need to worry about the location of the closest power outlet or the fear of an inadvertent power outage. The unique evo eveRest2 battery pack will keep the system functional for hours without household current

The integrated heated humidifier option rounds out the evo eveRest2 CPAP system. Clinical research has shown that CPAP patients tend to be more compliant with the addition of heated humidity. The evo eveRest2 heated humidifier provides just enough water for one night's use, and the reservoir is simple to fill and clean.

News Room:

(October 27, 2005, Minneapolis, MN) -- evo eveRest2, the completely integrated CPAP System from evo Medical Solutions, has been approved for use on United Airlines and SAS flights. Travelers using the evo eveRest2 CPAP with its optional integrated system battery can remain compliant with their therapy schedule even when flying for business or pleasure.

Features:
* Automatic Altitude Adjustment to about 11,000 feet.

* Patient adjustable starting ramp pressure

Specifications:
Operating Pressure: 4 - 20 cm H20 in 1 cm H20 increments

Ramp Operation: 5 - 45 minutes in 5 minute increments.

Compliance Information: Total therapy hours

Dimensions: 5" wide x 6" high x 5" deep

Weight: 2.1 lbs

Power Supply: 100 - 240 VAC, 50/60 Hz, 19 VDC

Air Filter: Washable foam

Warrantee: 2 years

$126.78

$33.86

$67.73

 eveRest 3 Integrated System Humidifier

The eveRest 3 heated humidifier integrates completely into the CPAP. The humidifier's docking bay slides directly onto the bottom of the CPAP, providing the electrical connection for the system. The humidifier heating is controlled via the humidifier button on the CPAP

Prescription Required

 Reservoir capacity: 240 ml

Safety Temperature Off: 60* C (140 * F)

Weight: 1 pound

Power Source: 100-240 VAC, 50/60 Hz, 14.8 VDC

Warrantee: 2 years

 Heat settings: 0 (off) to 5 (warmest)

Maximum output humidity: 88% relative

Dimensions: 5" wide x 4" high x 6" deep

Operating range: 40*F - 104*F, 10% to 95% relative humity, non-condensing

$113.95

$33.86

$66.95

The proprietary eveRest 3 CPAP battery is an optional component, and offers flexibility and mobility to patients who lead an active life style and want to be able to use their CPAP system whenever and wherever they need it without being confined by the availability of AC power or an outlet. The battery also ensures peace of mind by providing seamless batteryback-up in case of loss of wall power.

The proprietary eveRest 3 CPAP battery is an optional component, and offers flexibility and mobility to patients who lead an active life style and want to be able to use their CPAP system whenever and wherever they need it without being confined by the availability of AC power or an outlet. The battery also ensures peace of mind by providing seamless batteryback-up in case of loss of wall power.

 Proprietary design: 16 nominal 14.8 VDC, 4S3P Li-ion, replaceable cell pack

Recharge time: <4 hours with depleted cells

Charge indicator: 4 bar capacity indicator

Dimensions: 5" x 7.5" x 1.175"

Weight: 1.5 pounds

Operational time: 11 hours @ 10 cm H2O with non-heated humidification. Heat settings will reduce battery time by >/- 50%

Operating range: 40* - 104* F 10% - 95% relative Humidity

Warrantee: 1 year

Complies with International Flight Regulation 49CFR Part 171.8, 7.2 grams equivalent of lithium, yeilds 96 watt hours.

$192.95

$221.40

$129.48

ResMed's stylish HumidAire 4i is designed to provide heated humidification and form a seamlessly integrated unit when attached to the ResMed S8 series.

The combination of an S8 and HumidAire 4i provides the first compact system offering truly integrated humidification.

ResMed's HumidAire is designed to offer relief from the symptoms of dryness and congestion associated with CPAP therapy without compromising performance or ease of use.

 Patient Benefits:

Flip top lid design -- no need to remove tube to refill water chamber. Convenient and user friendly.

Compact design -- unobtrusive in the bedroom and easily packed for travel.

Seamlessly integrated unit -- simply snaps into place whenever required.

385 ml capacity -- high volume, high efficiency humidification in a compact unit

Powered by ResMed's S8 devices -- no additional power cords or cables required

Dial control -- easy to use in the dark and quick to respond

Power-on light plus heating indicator -- user friendly.

Easy to clean -- convenient

Technical Specifications:

Performance -- Maximum heater plate temperature: 185 degrees F. Temperature cut-out 199 degrees F. Maximum output humidity: 95% relative humidity

Dimensions -- 4.6" H x 6.7 " W x 8.3" D

Weight -- Docking station and unfilled water chamber, 1.5 pounds

Power supply -- 100 - 240 VAC, 50/60 Hz; 110 VAC, 400 Hz; 2.5A, Instantaneous peak power consumption <340 VA.

Note: Consult the medical department of the air carrier before using on aircraft.

$260.00

The HC604 humidifier CPAP System is a truly integrated Continuous Positive Airway Pressure generator with a heated humidifier, designed for the treatment of Obstructive Sleep Apnea in adult patients.

The HC604 comprises ThermoSmart Technology, a unique Fisher & Paykel Healthcare technology that allows for optimum levels of humidity independent of room temperature. The levels of heated humidification being provided are up to 50% higher than conventinal humidifiers are able to deliver (up to 30 mg/l. Furthurmore, the technology prevents condensation from forming and thus ensures optimal pressure being delivered at the mask.

$949.00

$3.03

$23.90

$59.76

 The HC230 Series is a comprehensive range of standard and truly integrated flow generators for the treatment of OSA. It's versatile design can deliver comfortable and effective therapy to mee changing therapy needs effectively.

The HC234 comes with the carrying bag, two water chambers, 6 foot air tube, air filter and a whater funnel.

 Features:

Ambient Tracking Plus -- Superior auto adjusting humidification technology increases user comfort and therapy effectiveness by minimizing disruptive condensation and associated mask pressure instability while maximizing humidity to alleviate upper airway congestion.

Integrated Simplicity & Reliability -- A truly integrated unit with single piece chamber, ergonomic design and intuitive menu system

Automatic Altitude Adjustment

Leak Compensation

Proportional Ramp

 Specifications:

Dimensions -- 10.8" L x 6.7" W x 5.5" H

Weight -- 4.4 lbs

Chamber Capacity -- 400 ml

Electrical Ratings -- 95 VAC to 255 VAC, 50/60 Hz. (100 - 115 VAC @ 1.2A to 1.3A max; -----220 - 240 VAC @ 0.8A to 1.8A max; 50/60 Hz)

Operating Pressure -- 4 to 20 cm H2O

$23.80

$30.38

$89.64

For CPAP users experiencing upper airway dryness, Puritan Bennett offers a mist of relief with the GoodKnight H2O Heated Humidifier. Designed for use with the GoodKnight 420 Series CPAP System or the GoodKnight 425 Bi-Level Device, the GoodKnight H2O Heated Humidifier increases air humidity, reducing patient dryness in the nose and throat. By improving comfort, it may help promote user compliance with aleep apnea treatment. In addition, the humidifier features a small footprint that fits neatly with GoodKnight sleep therapy devices, creating the smallest, lightest CPAP/Heated Humidifier combination on the market.

Specifications:

Performance:
.....Maximum Flow: 120 liters per minutes (leak flow included)
.....Pressure fall according to glow: 0.2 cm H2O
.....Service maximum pressure: 25 cm H2O
.....Humidification rate: 12 mg H2O/L @ 60 L/min and at maximum setting
.....Time of heating: </- 45 minutes
.....Duration necessary for the water temperature to reach 90% it value set, on at 23 +/- 2 degrees C temperature basic: 60 minutes.

Physical Characteristics:
.....Dimensions: 6.7" W x 3.7" H x 11" L
.....Weight: 1.76 pounds
.....Usable volume of the water chamber: 350 ml

Power Characteristics:
.....AC power cord supplies power to humidifier only; sleep therapy device has separate power cord. Input voltage: 100 VAC (+/- 15%), 120 VAC (+/- 10%/-20%), 230 VAC (+/- 10%), 50/60 Hz.

$212.25

$109.69
$125.36

$10.59

$16.94

$49.90

The somnotech CPAP Tubing Holder is designed to support your CPAP air tubing. The somnotech CPAP Tubing Holder is made out of lightweight aluminum tubing that is held together by an elastic type shock cord. Folded up it fits into a travel case that is less than 12" long. The entire unit weighs about 8 ounces. Extended it reaches a height of 44". It is designed to fit under the mattress and should work with any CPAP tubing.

The two piece construction make it ideal for travel, for packing into a suitcase and using in motel and hotel rooms. 

$23.95

$39.95

$467.29

$155.76

$3.03

$10.37

$10.37

$6.92

$6.92

$3.10

Invacare's exciting new sleep therapy products feature innovative technologies that enhance patient comfort and ultimately increase patient compliance.

Effortless Exhalation - - - makes breathing with CPAP feel natural and more comfortable for patients.

SoftX - - - named after the soft exhalation sensation it creates, tracks the patient's breathing pattern and minimizes the patient's work of breathing during exhalation

 Specifications:

Pressure range: 3-18 cm H2O in 1 cm H20 increments

Ramp: 5, 10, 20, and 30 minutes

Dimensions: 8.9" W x 10.2" L x 5.6" H

Weight: 5 pounds

Power Supply: 110-240 VAC, 50/60 Hz

Air Filter: 45-60 ppi foam, reusable

$7.19

Invacare's exciting new sleep therapy products feature innovative technologies that enhance patient comfort and ultimately increase patient compliance.

Effortless Exhalation - - - makes breathing with CPAP feel natural and more comfortable for patients.

SoftX - - - named after the soft exhalation sensation it creates, tracks the patient's breathing pattern and minimizes the patient's work of breathing during exhalation

 Specifications:

Pressure range: 3-18 cm H2O in 1 cm H20 increments

Ramp: 5, 10, 20, and 30 minutes

Dimensions: 8.9" W x 10.2" L x 5.6" H

Weight: 5 pounds

Power Supply: 110-240 VAC, 50/60 Hz

Air Filter: 45-60 ppi foam, reusable

$7.19

$1,471.58

$1,471.58

$1,471.58

$7.19

It is recommended that you use a 100 amp hour, 12 VDC deep cycle marine battery for operating you CPAP machine when not connected to 115 VAC/230 VAC.

Most CPAP manufacturers recommend a minimum of 175 watt output for the DC to AC inverter. It is best if you order the DC to AC inverter recommended by the manufacture.

$28.08

$27.74

$132.48
$161.21

$55.21

$164.68

$129.92

$44.64

$146.82