The Sandman Auto CPAP device was designed to be highly accurate, comfortable and intelligent in order to deliver optimal auto CPAP pressure. This premium CPAP device has pressure and flow sensing capabilities that detect apneas, hypopneas, inspiratory flow limitations and snoring so it can react with optimal pressure at all times, while only increasing pressure during obstructive events. The patients' critical data is stored internally for easy analysis with the optional software, while the auto-calibration feature provides precise pressure delivery for nearly all mask and tubing combinations.

Like all Sandman therapy devices, Sandman Auto is simple to operate and robust. It has backlit front-facing screen and buttons so that patients can make simple adjustments without needing to sit up and turn on the light. It is light-weight, has an integrated power supply, single power cord and unique integrated heated humidifier for more comfortable therapy.

FEATURES:

COMPLIANCE CAPABILITIES
---Recording of apneas and hypopneas with central/obstructive split.
---Recording of inspiratory flow limitations and snoring.
---Leak detection and reporting for each respiratory event.
---Approximately 200 session of 8 hours stored in embedded memory.
---Approximately 50 session of 8 hours available on memory card.
---Comprehensive Sandman therapy software.

PERFORMANCE CAPABILITIES
---Enhanced auto algorithm smoothly adjusts pressure during obstructive events.
---Digital Signal Processor for precise flow control.
---Automatic altitude/barometric compensation.
---Data download via memory card.
---Direct USB connectivity using Sandman therapy software to:
* Direct data download.
* Upload new settings.
* Visualize actual session.

EASE OF USE
Front-facing display screen.
Large, backlit buttons.
Fluid-resistant display screen.
Automatic patient reminders.
Automatic light dimmer.
Only one cord for CPAP and heated humidifier.
Ability to run on an external battery.

SPECIFICATIONS:

Air pressure and flow generated by a centrifugal blower with dynamic pressure regulation.

PRESSURE OUTPUT: 3 to 20 cm H2O.
FLOW OUTPUT: 190 LPM @ 20 cm H2O.
NOISE LEVEL: 26 dB @ 1 meter @ 10 cm H2O.
RAMP DURATION: 0 to 45 minutes in 5 minute increments.

SIZE: 6.9" W x 7.5" D x 4.7" H.
WEIGHT: 2.5 lbs (2.65 lbs with heated humidifier).

POWER SUPPLY: Input range 100-240 VAC, 50-60 Hz.
OPERATING ALTITUDE: 0 to 9,000 feet.

FILTERS: Cleanable foam and ultra-fine high-efficiency.

FEATURES:

 iSleep 20i is an advanced high performance self-adjusting CPAP that predictively identifies and treats obstructed breathing at a reduced mean
pressure level compared to conventional CPAP. The iSleep 20i uses a patented advanced signal processing technique to detect various breathing
patterns in order to provide the appropriate reatment.

The optional iSleep PC Software displays pressure, flow, leakage and any abnormal breathing as waveforms on the screen and in the reports. It also displays a histogram of pressure levels as well as an index of abnormal respiration, as a percentage of total therapeutic time (ARDI). It provides a compliance report and full disclosure therapy report with the patient’s AHI, pressure, flow and leakage data.

The memory card capability allows for quick and easy download of longterm patient compliance data and detailed log. The truly integrated heated
humidifier provides adjustable upper airway’s humidification for increased compliance.

The upright and stable design of the iSleep 20i takes a minimum space on the nightstand and suites perfectly in any bedroom. The hose connection in the rear makes it look like a normal item on the nightstand.

The lightweight design and the built-in carrying handle makes travelling easy. The universal power supply enables operation in any corner of the world. It can even be powered from a car or recreational vehicle when enjoying an active everyday life.

SPECIFICATIONS:

Therapeutical modes:

• iMode (self-adjusting)
• CPAP

Pressure settings 4 to 20 cmH2O (CPAP mode)
Min pressure setting (Pmin) : 4 cmH2O to Pmin
Max pressure setting (Pmax): Pmin to 20 cmH2O

Ramp time 5 to 60 miutes
Ramp start pressure 4 cmH2O to Pmin

Integrated heated humidifier 1 to 9

Maximum flow
6.7 cmH2O: 108 l/min
13.3 cmH2O: 132 l/min
20 cmH2O: 132 l/min

Maximum limited pressure during single fault condition 30 cmH2O

Breathing resistance under single fault condition 0.9 cmH2O at 30 l/min
3.2 cmH2O at 60 l/min

Sound level at 10 cmH2O Less than 28 dB(A)

POWER SUPPLY
Mains supply 100 to 240 V AC
External supply 12/24 V DC, 12 V adapter available
Standby power 3 W

OPERATING CONDITIONS
Recommended leakage 20 to 40 l/min at 10 cmH2O
Minimum leakage 12 l/min at 4 cmH2O

DIMENSIONS
W x H x D 6 7/8" x 6 7/8" x 7 15/16" (173 x 172 x 201 mm) (with humidifier HA 01)

Weight 4.2 lbs (1,9 kg)

 SensAwake

The SleepStyle 200 Auto Series delivers outstanding clinical, patient-care and commercial results due to its innovative SensAwake Technology and it unique ability to personalize sleep comfort to the needs of the patient.

Patients commonly arouse from sleep and experience awake states, during which they are intolerant of the delivered pressure and can have difficulty returning to sleep. To aid the transition back to sleep, patient comfort is critical.

SensAwake uses flow to fonitor patients breathing patterns, senses the critical awake state and promptly reduces the delivered pressure. SensAwake, together with the advanced auto-adjusting system, personalizes treatment during sleep and awake states. SensAwake facilitates the return to sleep to increase sleep quality and ultimately improve therapy.

 PerformanceMaximizer

The new treatment efficacy reporting software, PerformanceMaximizer, offers detailed reporting on therapy effectiveness, including compliance, AHI, leak and pressure.

PerformanceMaximizer:
* is a comprehensive patient management system
* reports on the last 30 nights of summary data
* reports on the last seven nights of detailed data
* reports on cumulative data from firs use
* allows the printing, saving or emailing of reports
* allows for the easy download of data with the SmartStick

The SmartStick is removable media, unique to Fisher & Paykel Healthcare utilizing USB technology. No additional cables or card readers are necessary.

 Benefits:

AUTO-ADJUSTING PRESSURE TECHNOLOGY: The SleepStyle 200 Auto Series delivers effective titration and long-term treatment for patients by detecting and responding to flow limitations, apneas and hypopneas during sleep.

SENSITIVITY:
SensAwake Technology delivers personalized therapy during sleep and awake states, enhancing your sleep quality and therapy uptake.

PERFORMANCE:
PerformanceMaximizer Software allows for on-demand reporting of efficacy data. Pressure Control features altitude adjustment and leak compensation.

EASE OF USE:
The intuitive menu, quiet operation, compact design and convenient removable media for efficacy reporting make for a quick and easy set-up.

VERSATILITY:
Combination Auto CPAP and CPAP technology treats lpatients in the most suitable mode.

 Specifications:

Dimensions: 10.8" L x 6.7" W x 5.5" H

Weight: 4.2 lbs.

Performance: 4 to 20 cm H2O

Altitude Range: 0 to 9000 ft.

Electrical Ranting:
Supply Frequency: 50-60 Hz
Voltage & Current: 100-115 V (1.2A, 1.3 A Max)
220-240 V (0.8 A, 1.8 A Max)

DC to AC Inverter Requirements:
115 V - 200 W/300 W surge
230 V - 300 W/500 W surge

S8 AutoSet II is the premium auto-adjusting device in ResMed's S8 Series II, featuring the following benefits:

New whisper-quiet operation is 75% quieter than before

New Easy-Breathe technology - ResMed's revolutionary new therapy system

New and improved EPR with Easy-Breath technology - for enhanced patient breathing comfort

Usage-based compliance download for accurate patient monitoring

Data card - a standard feature included for easy two-way data transfer

 Features:

Whisper-quiet motor - Setting a new industry standard in quiet therapy and comfort, ResMed's new sophisticated motor design delivers superior performance at a lower effert while cutting device noise significantly. By reducing noise, Easy-Breath technology enables patients and their bed partners to sleep peacefully through the night.

Easy-Breathe Technology - Easy-Breath technology combines new softwre, a quieter motor and improved EPR for maximum comfort and a quiet night's sleep. With Easy-Breath technology, EPR is integrated with AutoSet technology for pressure relief that continually adjusts to patients' pressure needs, breath by breath.

Pressure relief for more natural breathing - Featuring ResMed's improved EPR with Easy-Breath technology, the S8 AutoSet II offers pressure relief delivered in a smooth waveform that mimics patient breathing. With a choice of three different EPR comfort levels, the S8 AutoSet II with Easy-Breath technology allows customized comfort for breathing that feels natural.

 Specifications:

Pressure Range: 4 - 20 cm H2O

Data Storage: Data includes usage, leak, AHI, events and pressure
Via cable: 365 sessions of summary data, five sessions of detailed data.
Via ResScan Data Card: 180 sessions of summary data, five sessions of detailed data.
Data also available via the LCD menu
High resolution data: five sessions of flow data recorded at 25 Hz with S8 ResLink

Dimensions: 6.5" W x 5.7" D x 4.6" H

Weight: 3.09 lbs

Noise Level: Radiated sound pressure is measured at <24 dBA at 10 cm H2O at 1 meter according to ISO 17510-1

Power Supply: 100-240 VAC, 50/60 Hz, 12 V or 24 V DC via ResMed's DC-12 converter.

Air Filter: Two-layered, powder-bonded, polyester non-woven fibre

Now with 30% more humidity, ResMed's latest technology ensures the H4i heated humidifier delivers the most humidity output of an integrated device. The H4i clicks easily into place and supports ResMed's full S8 platform---from entry-level CPAP to premium VPAP bilevels. The compact design is unobtrusive in the bedroom and easily packed for travel.

It is designed to offer relief from the symptoms of dryness and congestion associated with CPAP therapy without compromising therapy effectiveness or ease of use. The flip-top lid design eliminates the need to remove the tube for refilling. The seamlessly integrated unit simply snaps into place whenever required and is powered by ResMed's S8 devices--no additional power cords or cables required. The easy-to-use dial control and power-on light plus heating indicator are other user-friendly features of the H4i.

Up to 40% of nasal CPAP users experience nasal congestion and dryness of the nose and throat. Research proves that the warm, moist air that humidification provides can relieve symptoms of dryness and make therapy more comfortable. In fact, compliance gains may be realized sooner if patients start with heated humidity at CPAP initiation.

Studies show that ResMed's HumidAire 3i and H4i humidifiers outperform competitive products, making ResMed's devices more effective not only with humidification, but al;so further enhancing therapy comfort and compliance

The H4i is specifically designed to produce greater humidification outputs to support the higher pressure delivered during bilevel therapy. However, bot the H4i and H3i are more than adequate for CPAP and APAP.

 
© ResMed 2008 Used with Permission

1 Richards et al. Am J Respir Crit Care Med 1996
2 Massie et al. Chest 1999
3 Rakotonanahary et al. Chest 2001
4 Neill et al. Eur Respir J 2003

Tested to ISO 8185, at 10 cm H2O bias flow and maximum device output

$260.00

The new DeVilbiss IntelliPAP AutoAdjust CPAP System incorporates all of the design and performance advantages of the IntelliPAP Standard CPAP System in addition to a wide range of customizable features.

This system has been designed with patients and providers in mind, incorporating many of the recommendations solicited through research to optimize patient adherence. IntelliPAP's combination of auto-adjusting pressure, comfort, education and adherence tracking with SmartCode helps to ensure patient compliance - all in a highly efficient platform that makes great business sense to you.

From its reliable electronics and water resistant housing to its durable Lexan humidifier chamber and stainless steel heat transfer plate, IntelliPAP is built for years of dependable performance and patient satisfaction. Just what you would expect from DeVilbiss - the widely recognized leader in respiratory technology.

 FEATURES:

Automatic pressure adjustment based on event density and type

Adjustable apnea/hypopnea detection

Adjustable upper and lower pressure limits

Automatic detection of mask conditions and ultra-sensitive snoring detection.

Integrated Heated Humidification

Auto On/Off automatically starts the flow of air after breathing into the mask and stops the flow of air when mask is removed

Exclusive humidifier chamber design maximizes humidification and minimizes leaks

Exceptionally small footprint, smallest integrated unit among top-selling CPAP

Delay pressure ramp

 SPECIFICATIONS:

Size: 6.4" H x 6.5" W x 8.4" D

Weight: 4.45 lbs with humidifier

Pressure Range: 3 to 20 cm H2O (0.5 cm increments)

Power Supply: 100 to 240 VAC, 50/60 Hz

Automatic Altitude Compensation up to 9,000 feet

Quietest CPAP Unit on the market - only 26 dB

Best-in-industry warranty: 3 year on IntelliPAP, 2 year on humidification system.

* * Easily connects to the back of IntelliPAP

* * Simple data transfer from module to software via data card

* * Data Scope
- - - 3 years of usage data
- - - 120 nights of detailed therapy data
- - - 10 nights of graphical data
- - - 3 year warrantee

$99.38

$51.00

A-Flex is delivered by our clinically proven auto algorithm that maintains effective therapy at minimal pressures - making this combination even better for patients. The REMstar Auto M Series with A-Flex represents an amazing new chapter in pressure therapy. Not only does it make each breath more comfortable at inhalation and exhalation, the REMstar Auto also adjusts overall therapy to accommodate the patient's therapy needs due to changes in lifestyle or progression of disease state.
A-Flex is a comfort feature built on top of the REMstar Auto algorithm. If breathing events occur, the auto algorithm raises the A-Flex pressure profile to eliminate those events, while simultaneously making sure that pressure never rises to a level that's unnecessarily, and uncomfortably, high.
The REMstar Auto M Series with A-Flex is part of the Respironics System One™ Standard - a new approach that delivers the ultimate sleep therapy experience.

 Features:

* A-Flex for more natural breathing therapy

* Compact -- will fit in a suitcase

* Lightweight -- for frequent travelers

* Automatic Altitude Compensation

* Adjustable Ramp Time in 5 minute increments

* Built-in Memory with encorepro Smart Card

* Two Stage Filter System

* International Power Supply

* 12 VDC without DC to AC inverter

* Screen displays with icon graphics.

* Warrantee - - - 2 years

Specifications:

Pressure: 4 to 20 cm H2O

Ramp: 0 to 45 minutes in 5 minute increments.
Starting pressure 4 cm H2O

Size: 7.5" L x 5.0" W x 3.125" H
With Humidifier 8 3/4" L x 8 1/4" W x 3 3/4" H

Weight: 2.2 pounds
3.7 pounds with humidifier and power supply

Power Supply: 100 to 240 VAC, 12 VDCVDC
Note: The DS200H, DS400H, and DS500H requires a modified sine wave DC to AC Inverter to run the Heated Humidifier off a 12 VDC battery.

Warrantee: 2 years (1 year on humidifier) 

Our Price shown below includes our FIVE STAR CUSTOMER SERVICE patient support including therapy follow-up, equipment, interface, and supply item questions and consultations, via telephone, email or fax by knowledgeable, caring, experienced CPAP personnel. FREE loaner machine usage; FREE warrantee repair/replacement service; FREE pressure checks.

We are only authorized to sell and ship Respironics Products to end-users residing in the United States of America

$156.01

$138.67

$4.85

$6.78

Designed specifically for most popular CPAP machines, the Super CPAP battery backup system allows people with Sleep Apnea to rest easy anywhere in the world. Stop searching for an AC wall outlet and rearranging the hotel furniture to position the bed within reach of a wall plug. Super CPAP's newest external power solution opens up a world of travel possibilities.

AIR TRAVEL: The lightweight Super CPAP battery is small enough to take on a red-eye flight and powerful enough to keep CPAP machines running throughout long international flights. The leather travel case and international AC charger makes an ideal travel companion.

Looking for a small, sleek, ultra-portable, and affordable way to power your CPAP or BiPAP? Need a backup for your CPAP or BiPAP in case of power failure? Look no further than the new Super Battery Pack from Super CPAP. This CPAP battery is sure to work with your device and provide a full night's sleep without recharging.

ResMed's stylish HumidAire 3i is designed to provide heated humidification and form a seamlessly integrated unit when attached to the ResMed S8 series.

The combination of an S8 and HumidAire 3i provides the first compact system offering truly integrated humidification.

ResMed's HumidAire is designed to offer relief from the symptoms of dryness and congestion associated with CPAP therapy without compromising performance or ease of use.

 Patient Benefits:

Flip top lid design -- no need to remove tube to refill water chamber. Convenient and user friendly.

Compact design -- unobtrusive in the bedroom and easily packed for travel.

Seamlessly integrated unit -- simply snaps into place whenever required.

385 ml capacity -- high volume, high efficiency humidification in a compact unit

Powered by ResMed's S8 devices -- no additional power cords or cables required

Dial control -- easy to use in the dark and quick to respond

Power-on light plus heating indicator -- user friendly.

Easy to clean -- convenient

Technical Specifications:

Performance -- Maximum heater plate temperature: 185 degrees F. Temperature cut-out 199 degrees F. Maximum output humidity: 95% relative humidity

Dimensions -- 4.6" H x 6.7 " W x 8.3" D

Weight -- Docking station and unfilled water chamber, 1.5 pounds

Power supply -- 100 - 240 VAC, 50/60 Hz; 110 VAC, 400 Hz; 2.5A, Instantaneous peak power consumption <340 VA.

Note: Consult the medical department of the air carrier before using on aircraft.

$260.00

$23.80

$30.38

$89.64

$71.71

$49.90

For CPAP users experiencing upper airway dryness, Puritan Bennett offers a mist of relief with the GoodKnight H2O Heated Humidifier. Designed for use with the GoodKnight 420 Series CPAP System or the GoodKnight 425 Bi-Level Device, the GoodKnight H2O Heated Humidifier increases air humidity, reducing patient dryness in the nose and throat. By improving comfort, it may help promote user compliance with aleep apnea treatment. In addition, the humidifier features a small footprint that fits neatly with GoodKnight sleep therapy devices, creating the smallest, lightest CPAP/Heated Humidifier combination on the market.

Specifications:

Performance:
.....Maximum Flow: 120 liters per minutes (leak flow included)
.....Pressure fall according to glow: 0.2 cm H2O
.....Service maximum pressure: 25 cm H2O
.....Humidification rate: 12 mg H2O/L @ 60 L/min and at maximum setting
.....Time of heating: </- 45 minutes
.....Duration necessary for the water temperature to reach 90% it value set, on at 23 +/- 2 degrees C temperature basic: 60 minutes.

Physical Characteristics:
.....Dimensions: 6.7" W x 3.7" H x 11" L
.....Weight: 1.76 pounds
.....Usable volume of the water chamber: 350 ml

Power Characteristics:
.....AC power cord supplies power to humidifier only; sleep therapy device has separate power cord. Input voltage: 100 VAC (+/- 15%), 120 VAC (+/- 10%/-20%), 230 VAC (+/- 10%), 50/60 Hz.

$777.92

$212.25

$109.87
$125.36

$68.32

$86.51

$232.92

The somnotech CPAP Tubing Holder is designed to support your CPAP air tubing. The somnotech CPAP Tubing Holder is made out of lightweight aluminum tubing that is held together by an elastic type shock cord. Folded up it fits into a travel case that is less than 12" long. The entire unit weighs about 8 ounces. Extended it reaches a height of 44". It is designed to fit under the mattress and should work with any CPAP tubing.

The two piece construction make it ideal for travel, for packing into a suitcase and using in motel and hotel rooms. 

$23.95

$39.95